Chauvet DMX 60 Manuale Utente
18
When setting the Home value you can use the Up or Down keys or the flash button to set the
home value.
To set the colour, beam or any other attributes select Insert.
Using the soft-key Name will toggle through the options available. Select the one you require.
The DMX key will take you to a screen where you can select which channel number is
associated with the attribute. Use the Up or Down keys to do this. Alternatively you can type a
value in using the flash buttons.
It is also possible to load fixtures from a comprehensive library stored at
home value.
To set the colour, beam or any other attributes select Insert.
Using the soft-key Name will toggle through the options available. Select the one you require.
The DMX key will take you to a screen where you can select which channel number is
associated with the attribute. Use the Up or Down keys to do this. Alternatively you can type a
value in using the flash buttons.
It is also possible to load fixtures from a comprehensive library stored at
4.3 Loading a Fixture
There are two methods of loading a fixture onto the console. In both cases you will need to
select the FixtProfiles key. This will bring up the following menu:
You now have two options. The first is to load fixtures that are stored on a memory module.
Select MemoryModule. You can now use the middle two soft keys to scroll through the fixtures
stored on the module. Select the one you require and load it.
Alternatively you can download fixtures from a PC. This requires a special cable, part number ---
-. You will need to download the software from
select the FixtProfiles key. This will bring up the following menu:
You now have two options. The first is to load fixtures that are stored on a memory module.
Select MemoryModule. You can now use the middle two soft keys to scroll through the fixtures
stored on the module. Select the one you require and load it.
Alternatively you can download fixtures from a PC. This requires a special cable, part number ---
-. You will need to download the software from
provided with th
e cable. Connect the cable to your PC‟s USB port and the 5 Pin XLR to your
controller. From the above menu screen select From PC. You now use the PC tool to download
the required fixtures.
the required fixtures.
4.4 Generics
The Tiger also supports the use of generic lights. These are usually plugged into a dimmer or a
switch pack. You can control up to 18 generic channels. These are patched automatically to
DMX value 1 to 18. If you wish to change these values go select Generics from the main
Assign/Patch screen:
switch pack. You can control up to 18 generic channels. These are patched automatically to
DMX value 1 to 18. If you wish to change these values go select Generics from the main
Assign/Patch screen:
Assign/Patch
Back
FixtProfiles
Fixtures
AutoPatch
Generics
Aux‟s
Edit Profile: Ch01
Name: Other
Back
DMX: 007
Home: 000
OK
Fixture Profiles
Back
Create/Edit
From MemoryModule
From PC