ADT Security Services SAVS20ADT-1 Manuale Utente

– 22 –

PANIC KEYS

(Continued)

See your installer and note here any functions programmed for your system.

CHECK IF

PANIC

ZONE

ACTIVE

KEY(S)

PLACE A CHECK NEXT TO PROGRAMMED FUNCTION

DISPLAY

[A]

___SILENT,

___AUDIBLE,

___PERSONAL, ___FIRE, ___ARM AWAY

9 5 †

[B]

___SILENT,

___AUDIBLE,

___PERSONAL,

___FIRE,

___ARM STAY

9 9 †

[C]

___SILENT,

___AUDIBLE,

___PERSONAL

___FIRE.

NOTE: KEY [D] DOES NOT PROVIDE A PANIC FUNCTION (SEE “SINGLE-BUTTON PAGING FEATURE” SECTION BELOW).

KEYS [A] AND [B] MAY HAVE BEEN PROGRAMMED FOR SINGLE-BUTTON ARMING INSTEAD OF AN EMERGENCY

FUNCTION, AS SHOWN.

†

THIS ZONE NUMBER NOT DISPLAYED IF KEY HAS BEEN PROGRAMMED FOR SINGLE BUTTON ARMING (ARM-AWAY or

ARM-STAY)

SINGLE-BUTTON PAGING FEATURE

The “D” key on the touchpads can be used to send a signal to a Pager (check if this feature has
been programmed in your system). The message displayed on the Pager when the “D” key is
pressed is

999–9999

. This code could mean “call home”, “call your office”, or other message. A

prearranged meaning for this signal should be agreed upon. See the illustration on page 12 for the
location of the “D” key.

To send a signal to the Pager, simply press the “D” key for at least 2 seconds. The recipient, on
seeing the

999–9999

display, will understand the pre-arranged meaning of this signal.