Справочник Пользователя для ADT Security Services SAVS20ADT-1
– 22 –
PANIC KEYS
(Continued)
See your installer and note here any functions programmed for your system.
CHECK IF
PANIC
ZONE
ACTIVE
KEY(S)
PLACE A CHECK NEXT TO PROGRAMMED FUNCTION
DISPLAY
[A]
___SILENT,
___AUDIBLE,
___PERSONAL, ___FIRE, ___ARM AWAY
*
9 5 †
[B]
___SILENT,
___AUDIBLE,
___PERSONAL,
___FIRE,
___ARM STAY
*
9 9 †
[C]
___SILENT,
___AUDIBLE,
___PERSONAL
___FIRE.
96
NOTE: KEY [D] DOES NOT PROVIDE A PANIC FUNCTION (SEE “SINGLE-BUTTON PAGING FEATURE” SECTION BELOW).
*
KEYS [A] AND [B] MAY HAVE BEEN PROGRAMMED FOR SINGLE-BUTTON ARMING INSTEAD OF AN EMERGENCY
FUNCTION, AS SHOWN.
†
THIS ZONE NUMBER NOT DISPLAYED IF KEY HAS BEEN PROGRAMMED FOR SINGLE BUTTON ARMING (ARM-AWAY or
ARM-STAY)
SINGLE-BUTTON PAGING FEATURE
The “D” key on the touchpads can be used to send a signal to a Pager (check if this feature has
been programmed in your system). The message displayed on the Pager when the “D” key is
pressed is
been programmed in your system). The message displayed on the Pager when the “D” key is
pressed is
999–9999
. This code could mean “call home”, “call your office”, or other message. A
prearranged meaning for this signal should be agreed upon. See the illustration on page 12 for the
location of the “D” key.
location of the “D” key.
To send a signal to the Pager, simply press the “D” key for at least 2 seconds. The recipient, on
seeing the
seeing the
999–9999
display, will understand the pre-arranged meaning of this signal.