NEC PX602WL-BK Manuale Utente
23
2. Projecting an Image (Basic Operation)
❻ Optimizing Computer Signal Automatically
Adjusting the Image Using Auto Adjust
When an image from HDMI IN, DisplayPort IN, BNC input terminal (analog RGB), COMPUTER 1 IN, or HDBaseT is
being projected, and the edge is cut off or the image quality is poor, this button can be used to automatically optimize
the projection image on the screen.
being projected, and the edge is cut off or the image quality is poor, this button can be used to automatically optimize
the projection image on the screen.
Press the AUTO ADJ. button to optimize a computer image automatically.
This adjustment may be necessary when you connect your computer
for the first time.
This adjustment may be necessary when you connect your computer
for the first time.
[Poor picture]
[Normal picture]
NOTE:
Some signals may take time to display or may not be displayed correctly.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE]
manually. (
→ page