Pioneer SCSI-2 Manuale Utente

CD-ROM Audio Control Parameters

- 53 -

An Immediate, Immed ,bit of one indicates the target will send completion status as

soon as the playback operation has been started. An Immed bit of zero indicates that

the drive will not send completion status until the audio playback operation is

completed or an error occurs.

A stop on track crossing, SOTC, bit of zero indicates the drive will terminate the

audio playback operation when the transfer length is satisfied. A stop on track

crossing bit of one indicates that the drive will terminate audio playback when the

beginning of a following track is encountered.

Refer to Table 2-9-6A on the opposite page for out port channel select options.

The channel volume control indicates the relative volume level for this audio port.

A value of zero indicates the output is muted, a value of FFh indicates the

maximum level. The output volume is defined by averaging port 0 and port 1.

The CD-ROM audio control parameter page sets the playback modes and output

controls of subsequent Play Audio commands and any current audio playback

operation.