3com 3CRUS2475 Manuale Utente

C

HAPTER

 9: Q

O

S C

OMMANDS

The following example displays all policy maps.

The trust cos-dscp Policy-map Class Configuration mode command 
configures the trust state. The trust state determines the source of the 
internal DSCP value used by Quality of Service (QoS). To restore the 
default configuration, use the no form of this command.

trust cos-dscp

no trust cos-dscp

The port is not in the trust mode.

If the port is in trust mode, the internal DSCP value is derived from the 
ingress packet.

Policy-map Class Configuration mode

Action serviced to a class, so that if an IP  packet arrives, the queue is 
assigned per DSCP. If a non-IP packet arrives, the queue is assigned per 
CoS (VPT).

Console# show policy-map

Policy Map policy1

class class1

set Ip dscp 7

Policy Map policy2

class class 2

police 96000 4800 exceed-action drop

class class3

police 124000 96000 exceed-action policed-dscp-transmit