3com 3CRUS2475 Manuale Utente

C

HAPTER

 9: Q

O

S C

OMMANDS

To return to the Policy-map Configuration mode, use the exit command. 
To return to the Privileged EXEC mode, use the end command.

The following example sets the DSCP value in the packet to 56 for classes 
in policy map called ‘policy1’.

The police Policy-map Class Configuration mode command defines the 
policer for classified traffic. To remove a policer, use the no form of this 
command.

police committed-rate-bps committed -burst-byte [exceed-action  
{drop | policed-dscp-transmit}]  

no police

■

committed-rate-bps — Specifies the average traffic rate (CIR) in bits 
per second (bps).

■

committed -burst-byte — Specifies normal burst size (CBS) in bytes.

■

drop — Indicates that when the rate is exceeded, the packet is 
dropped.

■

policed-dscp-transmit — Indicates that when the rate is exceeded, 
the DSCP of the packet is remarked according to the policed-DSCP 
map as configured by the qos map policed-dscp Global 
Configuration mode command.

This command has no default configuration.

Policy-map Class Configuration mode

Console (config)# policy-map policy1

Console (config-pmap)# set dscp 56