3com 3CRUS2475 Manuale Utente

To start using the CLI, perform the following steps:

1 Connect the DB9 null-modem or cross over cable to the RS-232 serial 

port of the device to the RS-232 serial port of the terminal or computer 
running the terminal emulation application.

a Set the data format to 8 data bits, 1 stop bit, and no parity.

b Set Flow Control to none.

Under Properties, select VT100 for Emulation mode.

d Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure 

that the setting is for Terminal keys (not Windows keys).

2 Enter the following commands to begin the configuration procedure:

3 Configure the device and enter the necessary commands to complete the 

required tasks. 

4 When finished, exit the session with the exit command.

When a different user is required to log onto the system, use the login 
Privileged EXEC mode command. This effectively logs off the current user 
and logs on the new user.

A CLI command is a series of keywords and arguments. Keywords identify 
a command, and arguments specify configuration parameters. For 
example, in the command show interfaces status ethernet g11, 
show, interfaces and status are keywords, ethernet is an argument 
that specifies the interface type, and g11 specifies the port.

Console> 

Console# 

Console(config)#