Axor 10100801 Manuale Utente

09/2005

Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation 

or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may have other rights which vary from State to State.

You may be required by law to give us a reasonable opportunity to correct or cure any failure to comply before you 

can bring any action in court against us under the Magnuson-Moss Warranty Act.

Upon purchase or prior to installation, please carefully inspect your Hansgrohe product for any damage or visible 

defect.  Prior to installing, always carefully study the enclosed instructions on the proper installation and the care and 

maintenance of the product.  If you have questions at any time about the use, installation, or performance of your 

Hansgrohe product, or this warranty, please call or write to us at the toll-free number and address printed above.

9.08940.01 Rev. 01

Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with 

regard to design and functionality.
To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not 

covered under the Hansgrohe warranty.
Cleaning Materials for Faucets and Showers

•     

To remove lime scale, use only products made specifically for that purpose.  Always follow the manufacturer’s 

instructions when using.

•     

Do not use cleaners that contain hydrochloric, formic, acetic, or phosphoric acids, as these will cause considerable 

damage to finishes and to plastic components.

•     

Never mix cleaning materials.

•     

Never use cleaners containing abrasives.  Do not use abrasive cleaning cloths, pads, or sponges.

•     

Clean your faucets and shower products as and when required.  Regular cleaning will prevent scale buildup and 

water spotting.

•     

Follow the label instructions.  Do not allow any cleaner to remain on the product for longer than necessary.

•     

When using spray cleaners, spray first onto a sponge or cloth – do not spray directly onto the product.

•     

After cleaning, rinse thoroughly with clear water to remove any cleaner residue.

•     

Soap and shampoo residue can also cause damage to the product.  Rinse well with clean water after use.

•     

If the surface is already damaged, harsh cleaning materials will cause further damage.