Axor 06064XX0 Manuale Utente
2
ThermoBalance II Rough
06623000
ThermoBalance II Rough with Stops
06627000
Technical Specifications
Recommended pressure
45 - 72 psi
Maximum hot water temperature
165° F*
Recommended hot water temp.
120° - 140° F*
Nominal capacity @ 45 psi
8 gpm
Nominal capacity @ 60 psi
11.5 gpm
Safety stop
100° F
Maximum output temperature
110° F**
½” NPT connections
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater.
**The high temperature limit stop may be reset to comply with local plumbing codes. See page 11.
(For the sake of clarity, the plastic installation box
(i-box) is not shown in these illustrations. The
i-box should not be removed.)
Rough-in 06627000 has service (isolation)
stops built onto the valve. When the screw-
driver slots is horizontal, the stops are in the
“on” position. When the screwdriver slots are
vertical, the stops are in the “off” position.
When connecting the hot and cold supplies,
When connecting the hot and cold supplies,
hold the stop steady with a wrench to avoid
stop mis-alignment, and breakage of the fac-
tory sealed thread compound.
The Service (Isolation) Stops
The cartridge shown is included
with the trim kit.
screwdriver
slots
English