Axor 06064XX0 Manuale Utente

5

When finishing the wall, install the wall material up 

to the oval installation box.  

Do not remove the installation box.  

When the trim is installed, the plaster shield portion 

of the installation box will be trimmed nearly flush 

to the wall and sealed to provide protection against 

water damage.  

The installation box includes a flushing plug to 

permit line flushing and pressure testing before 

the cartridge and finishing parts are installed.  A 

pressure test of the installed piping should be per-

formed before the walls are closed.
The flushing plug permits cold water to flow from 

the bottom outlet and the hot water through the top 

outlet.   
To flush the lines, install a hose bibb and hose 

to each outlet line.  (Using a hose will permit the 

water to be directed to a location where it will 

not cause damage.)  Flush the lines for at least 5 

minutes. 
The porting in the flushing plug prevents cross flow.  

However, it does not stop the flow of water through 

the outlets.