Yamaha RX-V3800 Manuale Utente

• When “Bass Out” is set to “Front”, the LFE signals found in 

bitstream sources, the low-frequency signals of the front left 
and right channels, and the low-frequency signals of other 
speakers set to “Small” are all directed to the front left and right 
speakers regardless of the “Front” setting.

• When “Bass Out” is set to “Front”, you can select only “Large” 

in “Front”. If the value of “Front” is set to other than “Large” in 
advance, this unit change the value to “Large” automatically.

y
See page 15 for the connection information of the surround 
speakers.

y
See page 15 for the connection information of the surround 
speakers.

Use this feature if you want to use the presence speakers 
connected to this unit.

• If you set “Presence” to “No”, you cannot activate the CINEMA 

DSP 3D mode (see page 50).

• “Dialogue Lift” is available only when “Presence” is set to 

“Yes” (see page 75).

Use this feature to select the speakers that output the LFE 
(low-frequency effect) and the low-frequency signals.

The woofer section of a speaker is

– 16 cm (6.5 in) or larger: large
– smaller than 16 cm (6.5 in): small

Select this setting when the front speakers are 
large.

Small

Select this setting when the front speakers are 
small.

Large

Select this setting when the center speaker is 
large.

Select this setting when the center speaker is 
small.

None

Select this setting when you do not use the 
center speaker. The center channel signals are 
directed to the front left and right speakers.

Large

Select this setting when the surround speakers 
are large.

Select this setting when the surround speakers 
are small.

None

Select this setting when you do not use the 
surround speakers. This unit is set to the Virtual 
CINEMA DSP mode (see page 50), and 
“Surround Back” is automatically set to “None”.

Large x1

Select this setting when the single surround back 
speaker is large.

Large x2

Select this setting when the surround back left 
and right speakers are Large.

Small x1

Select this setting when the single surround back 
speaker is small.

Select this setting when the surround back left 
and right speakers are small.

None

Select this setting when you do not use the 
surround back speakers. The surround back 
channel signals are directed to the surround left 
and right speakers.

Select “Yes” when you use the presence 
speakers.

None

Select “None” when you do not use the presence 
speakers.

Output

Output

No output

SWFR

Output

No output

No output

Front

No output

Output

No output