Yamaha RX-V3800 Manuale Utente

Selects the unit for displaying the values of “Speaker 
Distance” parameter.
Initial setting:Feet (U.S.A. and Canada models)

Meter (Other models)

■

Use this feature to manually balance the speaker levels 
between the front left or surround left speakers and each 
speaker selected in “Speaker Set” (see page 91).
Control range: –10.0 dB to +10.0 dB
Initial setting: 
Front L/Front R/Presence L/Presence R/Subwoofer: 
0.0 dB
CENTER/Surround L/Surround R/Surround Back L/
Surround Back R: –1.0 dB
Control step: 0.5 dB

y
If your subwoofer can adjust the output volume and the crossover 
frequency, set the volume to about half way (or slightly less) and 
set the crossover frequency to the maximum.

• The available speaker channels differ depending on the setting 

of the speakers.

• If you are only using one surround back speaker, connect it to 

the SURROUND BACK SINGLE jack, and adjust the balance 
in “Surround Back L”.

Use this menu to adjust the network and USB system 
parameters.

■

Use this feature to view the network parameters (IP 
address, etc.) or to change them manually.

Use this feature to select whether this unit can obtain the 
network parameters (IP address, subnet mask, default 
gateway, primary DNS server and secondary DNS server) 
from the DHCP server of the connected network.

Use this parameter to specify an IP address assigned to 
this unit. This value must not duplicate the one used for 
other devices in the target network.

Use this parameter to specify the subnet mask value 
assigned to this unit.

y
For most of the cases, the subnet mask value can be set as 
“255.255.255.0”.

Use this parameter to specify the IP address of the default 
gateway.

Use this parameter to specify the IP address of the primary 
and secondary DNS (Domain Name System) servers.

If you have only one DNS address, enter the DNS address in 
“DNS Server (P)”. If you have two or more DNS addresses, enter 
one of them in “DNS Server (P)” and another in 
“DNS Server (S)”.

Select “Setup” to confirm the settings of the “Network” 
parameters.

Meter (m)

Adjusts speaker distances in meters.

Feet (ft)

Adjusts speaker distances in feet.

Front L

Front left speaker

Front R

Front right speaker

Center

Center speaker

Surround L

Surround left speaker

Surround R

Surround right speaker

Surround Back L

Surround back left speaker

Surround Back R

Surround back right speaker

Presence L

Presence left speaker

Presence R

Presence right speaker

Subwoofer

Subwoofer

Select this setting when this unit can obtain the 
network parameters from the DHCP server of 
the connected network.

Off

Select this setting when you set the network 
parameters manually.