Yamaha RX-A2010 Manuale Utente

En

You can play back music stored on a Bluetooth component on this 
unit using a Yamaha Bluetooth wireless audio receiver (such as 
YBA-10, optional). Refer to the instruction manuals of the Bluetooth 
receiver and your Bluetooth component in addition.
This unit supports A2DP (Advanced Audio Distribution Profile) of 
the Bluetooth profile.

• When connecting your Bluetooth component to the Bluetooth receiver for the first 

time, you need to perform “pairing” (mutual recognition for 2 Bluetooth 
components). After that, you only need to establish a wireless connection between 
those components to play back music via Bluetooth. “Pairing” must be performed 
between each combination. So if you have several Bluetooth components, you 
need to pair each of your Bluetooth components with the Bluetooth receiver.

Locate the Bluetooth receiver at the distance as far as from 
this unit.

Be sure to perform pairing when connecting a Bluetooth 
component to the Bluetooth receiver for the first time, or when the 
pairing setting has been deleted.

• The Yamaha Bluetooth receiver (YBA-10) can be paired with up to eight Bluetooth 

components. When the ninth component is paired, the pairing setting for the 
component which has not been used for the longest period of time will be deleted.

• Texts in parentheses denote indications on the front display.

Searching starts. If your Bluetooth component recognizes 
the Bluetooth receiver, the model name (such as “YBA-10 
YAMAHA”) will be displayed in the device list of your 
component.

• To cancel the search, press RETURN.

• You can also start the search by holding down MEMORY instead of step 3. 

(To cancel the search, press MEMORY again.)

This unit (rear)

Bluetooth receiver

S e a r c h i n g . . .

D O C K