ONKYO HT-R510 Manuale Utente

30

This chapter explains how to use the built-in tuner.

You can store your favorite radio stations as presets for con-
venient selection.

If you selected the FM band:
The AUTO indicator appears on the display and the 
HT-R510 searches for the next station automatically. Search-
ing stops when a station is found, and the TUNED and FM 
STEREO indicators appear, as shown.

The HT-R510 searches the FM band in 0.1 MHz intervals.

If you selected the AM band:
The frequency stops changing when you release the TUN-
ING button. The HT-R510 doesn’t automatically search for 
AM stations. You must use the TUNING [ ]  [ ]  buttons. 
Press repeatedly to change the frequency one interval at a 
time, or press and hold to quickly change the frequency. 
When you’re tuned into a station, the TUNED indicator 
appears.

The HT-R510 steps through the AM band in 10 kHz inter-
vals.

Tuning into weak FM stations
If the signal strength of the station you are trying to tune into 
is poor, you may not be able to tune into that station, or recep-
tion may be noisy. In this case, press the [FM MODE] button 
to select mono mode and disable auto-tuning (the AUTO and 
FM STEREO indicators will go off), and try tuning manu-
ally.

CH +

In this example, the FM band has been 
selected.

The volume can typically be set to MIN, 1 
though 79, or MAX.

If you’ve selected the FM band, be careful 
that you don’t press either button for more 
than half a second, otherwise the 
HT-R510 will start searching for the next 
station.