ONKYO HT-R510 Manuale Utente
32
Common Functions
This chapter explains functions that can be used with any
input source.
input source.
You can turn on and off speaker sets A and B individually.
Note:
When you turn on speaker set B, the listening mode for
speaker set A is set to Stereo.
When you turn on speaker set B, the listening mode for
speaker set A is set to Stereo.
With this function you can temporarily mute the output of the
HT-R510.
HT-R510.
Muting is cancelled when the HT-R510 is set to Standby.
This section explains how to display information about the
currently selected input source.
currently selected input source.
When the input source is not AM or FM:
* If the input signal is analog, no sound format information
is displayed. For non-PCM digital sources, the sound format
is displayed. This information is displayed for about three
seconds, then the previously displayed information reap-
pears.
is displayed. For non-PCM digital sources, the sound format
is displayed. This information is displayed for about three
seconds, then the previously displayed information reap-
pears.
When the input source is AM or FM:
Turning Speaker Sets On & Off
To turn on or off speaker set A, use
the SPEAKER [A] button, or the
remote controller’s [SP A] button.
the SPEAKER [A] button, or the
remote controller’s [SP A] button.
To turn on or off speaker set B, use
the SPEAKER [B] button, or the
remote controller’s [SP B] button.
the SPEAKER [B] button, or the
remote controller’s [SP B] button.
Press the remote controller’s [RCVR/
TAPE] button to select RCVR mode
before using the remote controller.
TAPE] button to select RCVR mode
before using the remote controller.
Indicator A lights up when speaker set A
is on. Indicator B lights up when speaker
set B is on.
is on. Indicator B lights up when speaker
set B is on.
CH +
CABLE/SAT
CD/DVD
STANDBY/ON
PHONES
MASTER VOLUME
VIDEO
2
TAPE
TUNER
C D
VIDEO
3
DVD
A
B
SPEAKERS
DIMMER
SURROUND
VIDEO
1
VCR
AUDIO
SELECTOR
DSP
STEREO
STANDBY
DISPLAY
AUDIO ADJUST
SPEAKER ADJUST
FM MODE
SUBWOOFER
MODE
DIGITAL INPUT
MEMORY
DIRECT
S VIDEO
AUDIO
VIDEO
L
R
TUNING
CLEAR
PRESET/ADJUST
VIDEO
3 INPUT
MUTING
DIMMER
SLEEP
DIMMER
PHONES
SP A
SP B
SP B
SPEAKERS A & B
LEVEL /
TEST
CH SEL
VOLUME /
DISPLAY
Press [RCVR/
TAPE] to select
RCVR mode.
TAPE] to select
RCVR mode.
A
B
SPEAKERS
Remote controller
A & B speakers indicators
Muting the HT-R510
(remote controller only)
(remote controller only)
Press the remote controller’s
[MUTING] button.
[MUTING] button.
The output is muted and the MUTING
indicator flashes on the display, as shown.
indicator flashes on the display, as shown.
To unmute the HT-R510, press the
remote controller’s [MUTING]
button again, or adjust the volume.
remote controller’s [MUTING]
button again, or adjust the volume.
The output is unmuted and the MUTING
indicator goes off.
indicator goes off.
Displaying Source Information
Press the [DISPLAY] button.
Press the [DISPLAY] button repeatedly to
cycle through all the information avail-
able for the current input source.
cycle through all the information avail-
able for the current input source.
Remote controller
DISPLAY
Input source
& volume
Sound format*
Input source
& listening
mode
Band, frequency
& preset #
Band &
listening mode