ONKYO HT-R510 Manuale Utente

 

4

 

1.

 

—Unless it’s for personal use only, 

recording copyrighted material is illegal without the permission 
of the copyright holder.

2.

 

—The AC fuse inside the HT-R510 is not user-service-

able. If you cannot turn on the HT-R510, contact your Onkyo 
dealer.

3.

 

—Occasionally you should dust the HT-R510 all over with 

a soft cloth. For stubborn stains, use a soft cloth dampened with 
a weak solution of mild detergent and water. Dry the HT-R510 
immediately afterwards with a clean cloth. Don’t use abrasive 
cloths, thinners, alcohol, or other chemical solvents, because 
they may damage the finish or remove the panel lettering.

4.

 

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, 
READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that the 
voltage in your area meets the voltage requirements printed on the 
HT-R510’s rear panel (AC 120 V, 60 Hz).
Setting the [STANDBY/ON] switch to STANDBY does not fully 
shutdown the HT-R510. If you do not intend to use the HT-R510 for 
an extended period, remove the power cord from the AC outlet.

 

The HT-R510 uses a battery-less memory backup system in order to 
retain radio presets and other settings when it’s unplugged or in the 
case of a power failure. Although no batteries are required, the 
HT-R510 must be plugged into an AC outlet in order to charge the 
backup system.

 

Once it has been charged, the HT-R510 will retain the set-
tings for several weeks, although this depends on the envi-
ronment and will be shorter in humid climates.

 

Make sure you have the following accessories:

 

  * In catalogs and on packaging, the letter added to the end of the product name indicates the color of the HT-R510. Specifications and operation are the same 

regardless of color.

 

• 6-channel amplifier
• 100 watts per channel min. RMS at 8 

 

Ω

 

, 2 channels driven 

from 20 Hz to 20 kHz with no more than 0.08% total har-
monic distortion

• WRAT (Wide Range Amplifier Technology)
• Optimum gain volume circuitry

 

• Dolby

 

*1

 

 Digital EX and Dolby Pro Logic II

• DTS, DTS-ES Matrix/Discrete 6.1, and DTS Neo:6 pro-

cessing

 

*2

 

• Cinema Filter function
• Advanced 24-bit DSP chip (5 DSP soundfields)
• Linear PCM 96 kHz/24-bit D/A converters on all channels
• Adjustable crossover (60, 80, 100, 120, 150 Hz)
• 2 component video inputs, 1 output
• 4 S-Video inputs, 2 outputs
• 3 assignable digital inputs (2 optical, 1 coaxial)
• Subwoofer pre out
• Color-coded multi-channel inputs
• Color-coded speaker terminal posts (SPEAKERS B use 

push-type terminals)

 

• 30 FM/AM presets
• FM auto tuning

 

*1. Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” Surround EX,” and the double-D symbol are trademarks of Dolby Laborato-

ries.

*2. “DTS,” “DTS-ES Extended Surround,” and “Neo:6” are trademarks of Digital Theater Systems, Inc.