ONKYO HT-R368 Manuale Utente

If you connect a component to a digital audio input, you 
must assign that input to an input selector. For example, if 
you connect your CD player to the OPTICAL IN 1, you 
must assign “OPTICAL1” to the “TV/CD” input selector.
Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, 
TV/CD, PORT

`

COAXIAL, OPTICAL1, OPTICAL2:

Select the input to which the component has been 
connected.

`

- - - - -:

Select if the component is connected to an analog 
audio input.

• When an HDMI IN is assigned to an input selector in 

“HDMI Input” (

), the same HDMI IN will be set as 

a priority in this assignment. In this case, if you want to use the 
coaxial or optical audio input, make the appropriate selection in 
the “Audio Selector” (

• Available sampling rates for PCM signals (stereo/mono) from a 

digital input (optical and coaxial) are 32/44.1/48/88.2/96 kHz/16, 
20, 24 bit.

• The  “TUNER” selector cannot be assigned and is fixed at the 

“- - - - -” option.

• If you connect a component (such as UP-A1 Dock with docked 

iPod/iPhone) to the UNIVERSAL PORT jack, you cannot 
assign any input to the “PORT” selector.

This section explains how to specify which speakers are 
connected and their sizes.

For speakers with a cone diameter larger than 16 cm, 
specify Large (full band). For those with a smaller 
diameter, specify Small (default crossover 150 Hz).
The crossover frequency can be changed in the “Crossover 
(Crossover Frequency)” (

• These settings are not available in either of the following cases:

– A pair of headphones is connected.
– The  “Audio TV Out” setting is set to “On” (

).

– “HDMI Ctrl (RIHD)” is set to “On” (

) and you’re 

listening through your TV speakers.

– Speakers B is on.
– Speakers A is off.

■

`

`

Cone diameter