ONKYO HT-R368 Manuale Utente

■

`

Small:

`

Large:

Select based on the cone diameter.

• If the “Subwoofer” setting is set to “No”, this setting is fixed to 

“Large”.

■

`

Small:

`

Large:

Select based on the cone diameter.

`

*1

If the “Front” setting is set to “Small”, the “Large” option 
cannot be selected.

■

Crossover (Crossover Frequency)
This setting is advantageous for the speakers that you 
specified as “Small” in the “Sp Config (Speaker 
Configuration)” (

). To get the best bass 

performance from your speaker system, you need to set 
the crossover frequency according to the size and 
frequency response of your speakers.

`

40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 
120Hz, 150Hz, 200Hz

Use the diameter of the smallest speaker in your system 
when choosing the crossover frequency.

*2

Choose the setting suitable for the speaker.

• For a more accurate setting, look up the frequency response in the 

manuals supplied with your speakers and set accordingly.

• Choose a higher crossover frequency if you want more sound 

from your subwoofer.

■

`

On 

`

Off 

Turn this setting on to boost bass output by feeding bass 
sounds from the front left, right, and center channels to the 
subwoofer. 

• When the “Subwoofer” setting is set to “No” or the “Front” 

setting to “Small”, this setting is fixed to “Off” (

).

• This setting is set to “On” automatically when the “Subwoofer” 

and “Front” settings are set for the first time to “Yes” and 
“Large” respectively.

■

`

Yes:

The audio is output from the speakers connected to 
the wireless unit.

`

No:

The audio is not output from the speakers connected 
to the wireless unit.

When the wireless unit is connected to the UNIVERSAL 
PORT jack on the AV receiver, you can select if you wish 
to output the audio from the speakers connected to the 
wireless unit.

• When no wireless unit is connected to the UNIVERSAL PORT 

jack on the AV receiver, this setting is not available.

*1

If the “Surround” setting is set to “None”, this setting cannot 
be selected.

Here you can specify the distance from each speaker to the 
listening position so that the sound from each speaker 
arrives at the listener’s ears as the sound designer intended.

• These settings are not available in either of the following cases:

– A pair of headphones is connected.
– The  “Audio TV Out” setting is set to “On” (

).

– “HDMI Ctrl (RIHD)” is set to “On” (

) and you’re 

listening through your TV speakers.

– Speakers B is on.
– Speakers A is off.

■

`

feet:

Distances can be set in feet. Range: 1ft to 30ft in 
1 foot steps.

`

meters:

Distances can be set in meters. Range: 0.3m to 9.0m 
in 0.3 meter steps.

■

`

Specify the distance from the each speaker to your 
listening position.

• Speakers that you set to “No” or “None” in the “Sp Config 

) cannot be selected.

Over 20 cm

40/50/60 Hz

16 to 20 cm

70/80/90 Hz

13 to 16 cm

100 Hz

9 to 13 cm

120 Hz

Under 9 cm

150/200 Hz

When an optional unit is connected to the UNIVERSAL 
PORT jack on the AV receiver, the speaker setting 
menu may appear on-screen.