ONKYO HT-R368 Manuale Utente

■

`

0 to 2 to 5

With this setting, you can specify by how much the front 
left and right channel output is attenuated in order to create 
the center channel. 
Changing the value from “0” to “5” will spread the sound 
of the center channel to left and right (outwards).

■

`

Wide:

Select if the listening angle is 40 degrees.

`

Narrow:

Select if the listening angle is 20 degrees.

With this setting, you can optimize the Theater-
Dimensional listening mode by specifying the angle of the 
front left and right speakers relative to the listening 
position. Ideally, the front left and right speakers should be 
equidistant from the listening position and at an angle close 
to one of the two available settings.

Items can be set individually for each input selector.

■

`

0 ms to 400 ms in 10 msec steps

When using progressive scanning on your Blu-ray 
Disc/DVD player, you may find that the picture and sound 
are out of sync. With this setting, you can correct this by 
delaying the audio signals.
To view the TV picture while setting the delay, press 
ENTER.
To return to the previous screen, press RETURN.

The range of values you can adjust will depend on whether 
your TV supports HDMI Lip Sync and if the “LipSync” 
setting is set to “On” or not (

• A/V Sync is disabled when the Direct listening mode is used with 

an analog input source.

■

`

- - -, Blu-ray, DVD, HD DVD, VCR, DVR, Tivo, 
CableSTB, SAT STB, PS3, Wii, Xbox, PC, TV, CD, 
TAPE, iPod:

To reset to the default, select “- - -”.

You can enter a preset name for each individual input 
selector for easy identification. When entered, the preset 
name will be displayed.

• You can’t assign the same preset name to multiple input selectors.
• This setting cannot be used for the TUNER (AM, FM) input 

selector.

Front left speaker

Front right speaker

Preparation
Press the input selector buttons to select an input source.