Marantz SR4400 Manuale Utente

• Speakers that you selected “None” for in the

Speaker Size Setup menu will not appear.

• The setup level for each channel is memorized for

reproduction in all surround mode.

• To adjust the speaker levels for 6.1-channel input

sources, you will need to use the 6.1CH Level
Input setup menu.

• When  “Mix” is selected, subwoofer output is

determined depending on the speaker sizes for
each channels. If the front speaker size is set to
“Large”, subwoofer output is only the LFE signal
contained in Dolby Digital or DTS processed
signals.

• When Front speaker is set ”SMALL”, then BASS

MIX is set “MIX”. (The display appears “BASS
MIX =

 ✱✱✱”.)

• Select the output level of the LFE signal

included in the Dolby Digital signal or the DTS
signal.
Select 0dB, -10 dB or OFF with Left or Right
cursor button.

• This setting is available during a digital signal is

playback.

In this mode, the SR4400 includes three controls
to fine-tune the sound-field as follow.

Select  “4.PRO LOGIC II” in SETUP MAIN
MENU with   or   cursor button.

Press the OK button to enter the menu.

Press   or   cursor button to select a desired
item.

Press   or   cursor button to select the mode
or set the level.

When you select “TO MAIN MENU” by
pressing the   or   button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the   or   cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.

Select the Panorama mode On or Off with   or 
cursor button.
Panorama wraps the sound of the front left and
right speakers around you for an exciting
perspective.

Set the Dimension level between 0 and 6 level in
1 level interval with   or   cursor button.
Adjust the soundfield either towards the front or
towards the rear.
This can be useful to help achieve a more
suitable balance from all the speakers with
certain recordings.

Set the Center width level between 0 and 7 level
in 1 level interval with   or   cursor button.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the
center is mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend of the front image.
If “NONE” was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.

EXIT

RETURN

TO MAIN MENU

Speaker

(Auto)

Speaker

Distance setup

MAIN

MENU

exit SETUP

MENU

Test Tone mode

Speaker

Distance

 setup

Direct selec

by remote

control

Listening

Positiom

Select “3. PREFERENCE” in SETUP MAIN
MENU with   or   cursor button.

Press the OK button.

Press   or   cursor button to select a desired
item.

Press   or   cursor button to adjust.

When you select “TO MAIN MENU” by
pressing the   or   button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the   or   cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.

• The bass mix setting is only valid when “LARGE”

is set for the front speakers and “YES” is set for
the subwoofer at stereo playback .

• When the “BOTH” is selected, the low frequency

s i g n a l   r a n g e   o f   “ L A R G E ”   a r e   p r o d u c e d
simultaneously from those channels and the
subwoofer channel.

When actual low frequency sound volume is
weak depending on room size, use this function
to fill low frequency sound equally in the room.

EXIT

TO MAIN MENU

exit SETUP

MENU

3

2

1

6

5

4

3

2

1

6

5

4

SR4400U DFU_01_ENG 2_2

03.4.10, 3:01 PM

Page 19

Adobe PageMaker 6.5J/PPC