Marantz SR4400 Manuale Utente
20
ENGLISH
1.
Select “6. 6.1 CH IN” in SETUP MAIN MENU
with or cursor button.
with or cursor button.
2.
Press the OK button to enter this menu.
3.
Press or cursor button to select desired
channel.
channel.
4.
Using the or cursor button, adjust the
volume level of each channel.
volume level of each channel.
5.
When you select “TO MAIN MENU” by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
Note:
• The condition of these setup will be memorized to
6.1CH INPUT source.
Note:
• When Center speaker is set ”None”, then
C.WIDTH is set “7”. (The display appears
“C.WIDTH =
“C.WIDTH =
✱✱✱”.)
5. CS II (CIRCLE SURROUND II)
1.
Select “5. CS II” in SETUP MAIN MENU with
or cursor button.
2.
Press the OK button to enter this menu.
3.
Press or cursor button to select desired
item.
item.
4.
Press or cursor button to set the level.
5.
When you select “TO MAIN MENU” by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
TRUBASS:
Set the TRUBASS level between 0 and 6 level in
1 level interval with or cursor button.
TRUBASS produced by the speakers to be an
octave below the actual physical capabilities of
the speakers adding exciting, deeper bass
effects.
1 level interval with or cursor button.
TRUBASS produced by the speakers to be an
octave below the actual physical capabilities of
the speakers adding exciting, deeper bass
effects.
SRS DIALOG:
Set the SRS DIALOG level between 0 and 6
level in 1 level interval with or cursor button.
This can be popped out of the surround audio
effects allowing the listener to easily discern
what the actors say.
If “NONE” was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
level in 1 level interval with or cursor button.
This can be popped out of the surround audio
effects allowing the listener to easily discern
what the actors say.
If “NONE” was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
6. 6.1 CH INPUT LEVEL
This sub-menu is to adjust the speaker levels for
6.1-channel input sources.
Here you will adjust the volume for each channel
so that they are all heard by the listener at the
same level.
6.1-channel input sources.
Here you will adjust the volume for each channel
so that they are all heard by the listener at the
same level.
7. SURROUND
This sub menu is to adjust channel levels for each
surround setting groups. There are three surround
setting groups shown below. Therefore if settings
for a surround mode are changed, settings for all
other surround modes in the same group are also
changed.
surround setting groups. There are three surround
setting groups shown below. Therefore if settings
for a surround mode are changed, settings for all
other surround modes in the same group are also
changed.
Surround setting group
1 : AUTO, DOLBY, DTS, EX/ES, VIRTUAL,
STEREO
2 : Multi-ch stereo
3 : CS II
3 : CS II
1.
Select “7. SURROUND” in SETUP MAIN
MENU with or cursor button.
MENU with or cursor button.
2.
Press the OK button.
3.
To select a desired item, press or cursor
button.
button.
4.
Using the or cursor button to select the
mode or adjust the volume level of each
speaker.
mode or adjust the volume level of each
speaker.
5.
When you select “TO MAIN MENU” by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
SURR-MODE :
Select the desired surround mode with or
cursor button.
cursor button.
• If one of the following modes is selected, all other
modes are also set to the same. AUTO, DOLBY,
DTS, EX/ES, VIRTUAL, STEREO.
DTS, EX/ES, VIRTUAL, STEREO.
SURR. L/R :
Adjust the volume level of the surround left/right
speaker between -10 dB and +10 dB in 1 level
interval with or cursor button.
speaker between -10 dB and +10 dB in 1 level
interval with or cursor button.
• If “None” was selected for the Surround L/R
speaker setting in the Speaker size, then this
setting will not appear.
setting will not appear.
OFF
ON
PANORAMA
DIMENSION
C.WIDTH
0
7
EXIT
TO MAIN MENU
exit SETUP
MENU
4. PRO LOGIC II
setup
MENU STRUCTURE of PRO LOGIC II
setup
0
6
4. 5.
2. 5.
1. 3. 5.
NIGHT
CSII
EX/ES
DSP
DTS
S-DIRECT
AUTO
3
2
1
6
5
4
T.TONE
MENU OFF
SETUP/
MENU
OSD
SLEEP
MUTE
AMP
AUX
OK
VOL.
VOL.
TV
MAIN
TRUBASS
SRS DIALOG
EXIT
TO MAIN MENU
exit SETUP
MENU
0
6
0
6
MENU STRUCTURE of CS II
setup
5.CS II setup
4. 5.
2. 5.
1. 3. 5.
NIGHT
CSII
EX/ES
DSP
DTS
S-DIRECT
AUTO
3
2
1
6
5
4
T.TONE
MENU OFF
SETUP/
MENU
OSD
SLEEP
MUTE
AMP
AUX
OK
VOL.
VOL.
TV
MAIN
+10dB
+9dB
-9dB
Minimum
Maximum
1 dB interval
Reference
1 dB interval
-10dB
button
button
0dB
4. 5.
2. 5.
1. 3. 5.
NIGHT
CSII
EX/ES
DSP
DTS
S-DIRECT
AUTO
3
2
1
6
5
4
T.TONE
MENU OFF
SETUP/
MENU
OSD
SLEEP
MUTE
AMP
AUX
OK
VOL.
VOL.
TV
MAIN
MENU STRUCTURE of 6.1CH IN setup
EXIT
TO MAIN MENU
exit SETUP
MENU
channel
6. 6.1CH IN
setup
L
(Front Left)
C (Center)
R (Front Right)
SR(Surround Right)
SB(Surround back)
SL(Surround Left)
SW(Subwoofer)
SR4400U DFU_01_ENG 2_2
03.4.10, 3:01 PM
Page 20
Adobe PageMaker 6.5J/PPC