Antares TA-1VP Manuale Utente
TASCAM TA-1VP
15
Setting up the TA-1VP is very straightforward.
1 Find a suitable location. The TA-1VP is designed to
1 Find a suitable location. The TA-1VP is designed to
be mounted in a standard 19-inch equipment rack.
2 Connect an audio output to the LINE IN jack or
connect a microphone to the front panel MIC IN
jack (see Chapter 5 for details of patching the
TA-1VP into your system).
3 Connect a cable to the MAIN LINE OUT jack. If you
will be using the TA-1VP’s Stereo Double Tracking
feature, connect a second cable to the DOUBLE
TRACK LINE OUT and route as desired (see Chapter
5 for details of patching the TA-1VP into your
system).
4 If you will be controlling your TA-1VP via MIDI,
connect a MIDI cable from your MIDI source to the
TA-1VP’s MIDI IN jack.
5 The included PS-1225L AC adaptor will
automatically adjust to the available power world
wide. The AC power cord supplied with the AC
adaptor is correct for the country where the TA-1VP
is first sold. Contact TASCAM for replacement
power cords or adapters.
IMPORTANT! Do not attempt to modify the adaptor or
IMPORTANT! Do not attempt to modify the adaptor or
use any other adaptor that is not specifically intended
for the TA-1VP.
6 Connect the AC adaptor’s DC plug to the DC IN 12V
jack on the rear of the TA-1VP. Then plug the AC
adaptor into an AC outlet. Your TA-1VP will briefly
display the version number of its internal firmware
and then display the Select Preset page.
TASCAM
PS-1225L
AC outlet
DC plug
Use the hook (cord holder) on the rear panel to secure the
AC adaptor cord. When connecting the cord to the unit,
wrap it through the holder to prevent it from becoming
disconnected during use.
3 – Setting Up the TASCAM Vocal Producer