Antares TA-1VP Manuale Utente

1

  STANDBY/ON button 

Press this to switch the unit power between ON and 

STANDBY.

 

When in STANDBY mode, the TA-1VP is not 

drawing power, but the AC Adapter will still be using a 

small amount (less than 1 Watt)

2

An easy-to-read 20 character by 2 line display. You can 

set the optimum viewing angle in the Setup menu (See 

Chapter 5).

3

As the name implies, turn it to change the parameter 

value currently displayed on the LCD screen.

4

Press this button to save a newly created or edited 

preset. Also used to confirm choices in functions that 

would result in overwriting current data.

5

These five LEDs light to indicate the level of the 

incoming audio. Ideally, you should adjust the input to 

the highest level that does not consistently cause the 

top red LED to light. (The red LED lights at a level of 

–3 dB. Digital clipping, which introduces a particularly 

nasty-sounding distortion, will occur if the input 

exceeds 0 dB.)

The TA-1VP’s front panel meters are designed to give you 

a quick overview of what’s going on with the various 

modules. For precise parameter adjustments, appropriate 

modules provide high resolution meter displays on their 

various LCD pages.
6

Press this button to enter the Setup Menu. The button 

lights to indicate that you are in Setup Mode. The 

Setup Menu contains the settings that affect the 

TA-1VP’s overall state (i.e., independent of the currently 

selected Preset).

7

Press this button to move the cursor to the left on 

display pages with multiple data fields.

8

Press this button to move the cursor to the right on 

display pages with multiple data fields.

9

When in the Setup Menu, press this button to cycle 

sequentially through the available edit pages. You can 

only move in one direction, but there are so few pages 

in the Setup Menu that you are never more than a few 

presses away from where you want to be.

0

Press this button to display the Select Preset screen.

q

When this button is lit, the Mic Modeler module is 

active. When it is not lit, the module is bypassed. 

Pressing the button toggles its state.

w

Press this button to select the microphone that was (or 

will be) used to record the audio to be processed.

e

MODEL
Press this button to select the microphone whose 

audio characteristics you wish to apply to your audio.

r

Press this button to pass your audio through a model 

of a high-quality tube preamp with variable tube 

“warmth.”

t

Press this button to set low cut filters for the source 

and model mics and to adjust the mics’ proximity 

effects.

y

When this button is lit, the Auto-Tune module is active. 

When it is not lit, the module is bypassed. Pressing the 

button toggles its state.

u

CORRECTION Meter
This meter indicates, in real time, the amount of pitch 

correction being applied to change the input pitch to 

the target pitch. The green LEDs indicate that the input