Antares TA-1VP Manuale Utente

#

The TA-1VP’s main audio output. It accepts a 1/4-inch 

TRS (tip-ring-sleeve) phone plug.

$

If you have selected stereo double tracking, the 

second track is available at this output. It accepts a 

1/4-inch TRS (tip-ring- sleeve) phone plug.

%

Accepts a balanced line level signal on a 1/4-inch TRS 

(tip-ring-sleeve) phone plug. Unbalanced sources can 

also be connected, but they will be quieter, so extra 

input level adjustment will be required.

This input is NOT a microphone input. A line level signal is 

required. Connect Microphones to the front panel MIC IN 

jack.
^

Connect to the MIDI Input of a MIDI sequencer to 

dump. 
Preset and Setup Data via MIDI SysEx.

&

If you will be controlling your TA-1VP via MIDI, connect 

the MIDI Out from a MIDI sequencer, keyboard, or 

other MIDI source here. Connect the MIDI Out from a 

sequencer to load previously saved SysEx data files.

*

This RCA jack outputs a S/PDIF digital signal with the 

main output on Left, Double Track output on Right. 

The Sampling Frequency is 44.1 kHz fixed.

(

Plug in a footswitch here. A 1/4-inch TS (tip-

sleeve) plug is required. There are two varieties of 

footswitches: those that are shorted by default and 

those that are open by default. You should plug in 

your footswitch and then power on the TA-1VP. The 

TA-1VP will detect which kind of footswitch you have 

and behave accordingly.
The actual function of the footswitch is selected in the 

Setup Menu.

)

Use the hook (cord holder) to secure the AC adaptor 

cord.

Q

Plug the connector from the included AC adaptor 

(TASCAM PS-1225L) in here. Do NOT use an AC adaptor 

which is not expressly intended for the TA-1VP.