Panasonic SC-HT820V Manuale Utente
13
RQT7388
∫ Connecting a television with COMPONENT VIDEO terminals
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S-VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (P
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S-VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (P
B
/P
R
) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors.
≥The description of the component video input terminals depends
≥The description of the component video input terminals depends
on the television or monitor (e.g. Y/P
B
/P
R
, Y/B-Y/R-Y, Y/C
B
/C
R
).
Connect to terminals of the same color.
≥After making this connection, change the black level for a better
picture (
➜ page 28, Video—Black Level Control).
To enjoy progressive video
≥Connect to the component video input terminals on a 480P
≥Connect to the component video input terminals on a 480P
compatible television. (Video will not be displayed correctly if
connected to an incompatible television.)
connected to an incompatible television.)
≥All televisions manufactured by Panasonic and that have 480P
input connectors are compatible. Consult the manufacturer if you
have another brand of television.
have another brand of television.
∫ Connecting a television with an S-VIDEO IN terminal
S-VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance
(Y) signals. (Actual results depend on the television.)
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance
(Y) signals. (Actual results depend on the television.)
[Note]
Connect to a different terminal group than that you used for the
video cable (e.g., “VIDEO 2”).
Picture from this unit’s VHS will not appear when you use the same
group input terminal connections because the S-video terminal
input takes precedence.
video cable (e.g., “VIDEO 2”).
Picture from this unit’s VHS will not appear when you use the same
group input terminal connections because the S-video terminal
input takes precedence.
For better video from DVD
The following connections are for video from the DVD section only. Make sure you have connected the VIDEO OUT terminal with the
television to view video from the VHS section (
television to view video from the VHS section (
➜ page 12).
You may need to change the video-input mode on the television to view video from the VHS and DVD sections. Read your television’s
operating instructions for details.
operating instructions for details.
A
Y
P
B
/C
B
P
R
/C
R
COMPONENT
VIDEO OUT
S-VIDEO
OUT
LINE
OUT
OUT
LINE
IN
VIDEO
OUT
DVD/
VCR
VIDEO
IN
EXT
DVD
L
R
RF IN
RF OUT
LOOP
EXT
75
AM
ANT
FM
ANT
LOOP
ANT
GND
GND
COMPONENT
VIDEO IN
Y
P
B
P
R
Video cables
(not included)
Television
(not included)
(not included)
To television
(
(
➜ page 12)