Panasonic SC-HT820V Manuale Utente

RQT7388

After plugging the unit into your household AC outlet and pressing 
[

Í] to turn the unit on for the first time, the unit automatically tunes 

in all the channels it can receive and sets the clock.

The unit determines the type of transmission, TV or CATV, as 
follows:
TV: when there are less than 5 CATV channels.
CATV: when there are 5 or more CATV channels.

Preparation
≥Confirm that the antenna is connected correctly.

≥Turn on the television and select the video input for the VHS.

≥Press [VHS] to put the remote control in VHS mode.

Í] to turn on the unit.

Plug-in Auto Tuning starts and the unit puts the stations it can 
receive into channels (

➜ page 39, Channel range).

The unit starts auto clock setting when finished, then displays the 
time.

[Note]

If auto tuning stops partway (by changing the source, turning the 
unit off, or due to a power failure.)
1 Disconnect the AC power supply cord on the main unit and then 

reconnect it.

2 Turn on the main unit.

To cancel partway
Press [MENU].

∫ To start Plug-in Auto Tuning again (after 

Preparation
≥Press [Í] to turn on the unit.

≥Make sure there is no video cassette tape loaded in the unit.

≥Press [DVD/VHS] to select “VHS” as the source.

1 Press and hold [

X CH] and [W CH] on the main unit 

simultaneously for 3 seconds until the channel changes to “2”.

2 Disconnect the AC power supply cord on the main unit and then 

reconnect it.

3 Turn on the main unit. Plug-in Auto Tuning restarts.

∫ To set the channels manually (➜ page 39).

∫ If the unit couldn’t set the clock automatically

The MANUAL CLOCK SET screen appears. Set the time manually 
(

➜ page 38).