Rocketfish RF-SH230 Manuale Utente

15

RF-SH230

Should your headset stop responding, try plugging it into 
the power supply for a few seconds. Your headset should 
function again as normal. 

• Press the Vol+ [9], Vol– [3] and multi-function [1] buttons 

until you hear a series of four ascending beeps. 

• Press the Vol+ [9], Vol– [3] and multi-function [1] buttons 

until you hear a series of four ascending beeps. 
Note: All extended menu function settings will be lost. 

Turn the power on.

With the headset off, press and hold 
the multi-function button for three 
seconds.

Headset turns on and indicator flashes 
green.

Turn the power off.

With the headset on, press and hold 
the multi-function button for three 
seconds.

Indicator flashes green three times 
every second for two seconds, then the 
headset turns off.

Increase the volume.

With the headset on or during a call, 
press the Vol+ button repeatedly.

Every press you hear a beep with a 
higher volume and higher tone.

Decrease the volume. With the headset on or during a call, 

press the Vol– button repeatedly.

Every press you hear a beep with a 
lower volume and lower tone

Enter pairing mode.

With the headset off, press and hold 
the multi-function button for five 
seconds. See the pairing instructions 
of your mobile phone.

Headset indicator flashes green twice 
every second and you will hear a series 
of high tones.