Kenwood KDC-BT652U Manuale Utente

English

Press   SRC to select “TUNER”.

Press   repeatedly to select a band (FM1/ 
FM2/ FM3/ AM).

Press 

4 / ¢ to search for a station.

■

■

The tuning mode can be changed. Refer to 
<SEEK MODE> (page 8).

Press FM+ / AM– to select a band.

Press DIRECT to enter Direct Access 
Tuning mode.
“– – – –” appears.

Press the number buttons to enter the 
frequency.

Press 

4 / +¢ to search for the 

frequency.

■

■

To cancel Direct Access Tuning mode, press 

 or EXIT.

■

■

If no operations is done for 10 seconds after 
step 3, Direct Access Tuning is automatically 
canceled.

#FM+ / *AM– : Selects band.

4 / +¢ : Selects station.

1 – 6 : Selects preset station.

While listening to the radio...

Press the volume knob to enter 
[FUNCTION] mode.

Turn the volume knob to select 
[SETTINGS], then press to enter.

Turn the volume knob to make a 
selection, then press to confirm.
See table below for selection.

Hold   to finish the procedure.

SEEK MODE

AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ; 
MANUAL: Manually search for a station.

AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is 

not activated). (Selectable only if [NORMAL] is selected for [PRESET TYPE].) (page 5)

MONO SET

ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).

PTY SEARCH

Selects the available Program Type (page 9). Then, press 

4 / ¢ to start searching.

TI

ON: The traffic information automatically when the traffic bulletin starts. ; OFF *: Cancels. (Not applicable if “AM” 
is selected)

■

■

[TI], [PTY SEARCH] is selectable only when the source is “FM”. 

VOICE

PAR

iPod

■

■

Press and hold to memorize the current station.

■

■

Press briefly to recall memorized station.

B64-4919-00_02_K.indb   8

11/12/21   9:33