Pioneer HD-V9000 Manuale Utente

En

For details on operating the settings screen, see page 37.

• Settings in bold are the factory defaults.

Use the 

/ buttons to select, then press the ENTER button. The screen switches to the selected setting.

•

Standard (default) – Setting upon purchase. When this is selected, the detailed settings cannot be changed.

•

Memory 1 to 3 – Video settings can be adjusted and saved here. Detailed Settings? is displayed. Select YES then 
press the 

ENTER button. For a description of the setting items, see below.

 Detailed settings for Memory 1, 2 and 3

• When  the 

DISPLAY button is pressed while the detailed settings are displayed, the display switches between one 

item and all items each time the 

DISPLAY button is pressed. In the single item display mode, the settings can be 

made while checking the picture being played.

• When the video output resolution is set to 1920 x 1080p, 

3D or Flesh Tone can be selected at Noise Reduction, 

but the noise reduction function does not actually work. The noise reduction function will work if the output 
resolution is switched to something other than 1920 x 1080p.

 Digital audio output setting (Digital Audio Out)

Recall Settings

Calls out the video settings set at 

Memory 1, 2 or 3.

Noise Reduction

Reduces the noise of the brightness (Y) and color (C) signals.

MNR Mode

Reduces the mosquito noise (distortion generated in the contours of the picture during MPEG 
compression) in the picture.

ACE Level

Enhances the contrast in the dark areas.

Edge Level

Adjusts the image’s contours.

ICR Mode

Expresses a specific color (blue or green) more vividly.

Brightness

1

1. This setting does not affect the 

VIDEO OUT terminal’s output.

Adjusts the picture’s brightness.

Contrast

1

Adjusts the ratio of the brightness between the brightest and darkest parts of the picture.

Sharpness

Adjusts the sharpness of the picture.

Hue

1

Adjusts the balance between the green and red.

Black Setup

Corrects for excessively strong black in the brightness signal. If the black is too weak due to the 
combination with the connected display, select 

7.5 IRE.

Off

No audio signals are output from the 

DIGITAL AUDIO OUT or HDMI OUT terminals.

Audio signals are output from the 

DIGITAL AUDIO OUT and HDMI OUT terminals.