Zenoah BCZ5000DL/DW Manuale Utente

7

BCZ4500DL / BCZ4500DW / BCZ4500CL / BCZ5000DL / BCZ5000DW / BCZ5000CL

INSTALLING HANDLE (BCZ4500DL/5000DL)
• Set the handle and the barrier on the bracket. Attach

them with the 4bolts provided securely.

INSTALLING HANDLE (BCZ4500DW/5000DW)
• Loosen the 4bolts on the upper cap and insert the

handle. Retighten the bolts securely.

INSTALLING HANDLE (BCZ4500CL/5000CL)
• Loosen the handle knob to open the bracket and in-

sert the handle. Retighten the knob securely.

INSTALLING DEBRIS GUARD
• Attach the debris guard with the bolts provided to the

shaft.

INSTALLING BLADE
1. Put the angled bar(1) into the side holes of the inner

holder and the gearcase.

2. Remove the nut (Lefthanded) and the outer holder(3)

from the gearshaft.

3. Put the blade onto the inner holder(2). Make the

marked side face the holder.

4. Put the outer holder(3) onto the gearshaft making the

recessed side face the blade.

5. Fasten the blade by the nut and the cover(4).

INSTALLING LINE HEAD
1. While locking the gear shaft by inserting the supplied

tool into the upper holder on the gear box, loosen
and remove the nut (left-handed).

2. Detach the cover(1), fit the line head assembly to the

gear shaft. Hand tighten it securely.

DEBRIS GUARD SKIRT FOR LINE HEAD
• When using line head, make sure to attach the guard

skirt.

BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Slide clamp up or down until unit balances with head
    aparting from the ground when using it.