Zenoah BK4310FL Manuale Utente
10
try inserting it again.
• Once the liner has been inserted, pull on the liner to
make sure that the stopper is properly engaged.
■ ATTACHING THE THROTTLE CABLE
After fitting the wire, check if the wire sleeve is
correctly fitted to the wire stopper. It is dangerous if
the wire sleeve is out of the wire stopper because
the engine speed will not decrease even if the
throttle lever is released.
correctly fitted to the wire stopper. It is dangerous if
the wire sleeve is out of the wire stopper because
the engine speed will not decrease even if the
throttle lever is released.
• Align the throttle cable along with the liner and tie it
with band. (SE5)
(1) Band
(2) Throttle cable
(3) Tie loosely
(2) Throttle cable
(3) Tie loosely
1. Hook the cable and into the hole of the throttle lever.
And set the cable in the lever as shown in the picture.
(SE6)
(SE6)
2. Attach the lever as shown in the picture and screw it
securely. (SE6)
(1) Throttle lever
(2) Hole
(3) Throttle cable
(4) Screw
(5) Nut
(2) Hole
(3) Throttle cable
(4) Screw
(5) Nut
WARNING
4. SET UP
SE5
SE6