Zenoah BK4310FL Manuale Utente

■ ADJUSTING THROTTLE CABLE

• Proper play of the throttle cable is 1–2mm. Place the

throttle lever to the lowest speed position (i.e. fully
released status). Pull the throttle cable lightly with
fingers to check its play. Readjust the position of
cable adjuster if the play is too large or too small. To
readjust, slacken a lock nut. Turn the cable adjuster
clockwise to increase the play, or counterclockwise to
decrease the play. Lock the cable adjuster with the
lock nut after readjustment. (SE7)

■ ATTACHING THE HANDLE

• Attach the loop handle as shown in the accompanying

diagram. Note that it is recommended that you attach
the handle so that the handle is located some
30–40cm away from the front end of the right-hand
grip. (SE8)

■ ATTACHING THE DEBRIS GUARD

• Attach the guard to the clamp on the outer pipe just

touching the gearcase. Fix it with 2 bolts. (SE9)