Land Pride SC2672 Manuale Utente

All Land Pride Cutters have been designed and tested and meet rigorous voluntary
testing procedures specified by ANSI.

Customer can chose one of three optional motors for his SC2660 cutter or one of
two optional motors (medium and high volume) for his SC2672 cutter. This allows
the cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to a
different motor when owner upgrades his Skid Steer.

Shows Land Pride’s confidence in the gearbox and motor.

No pockets to collect rain and dirt. Easy to clean.

Protects sides from debris being thrown against them from the blades.

Single chain on the front and double chain on the rear. Reduces flying debris.

Protect side plate structure. Shoes are replaceable for convenience.

Allows for tight positive fit of stump jumper and blade bar to motor output shaft.

Standard stump jumper aids in sliding over obstructions, which helps protect
gearbox output shaft.

Heat-treated blades offer longer life.
Free swinging blades protect from obstructions.

Can aid in clearing brush.

Low volume motor = 18,540 fpm at 16 gpm.
Medium volume motor = 18,850 fpm at 21 gpm.
High volume motor = 19,000 fpm at 27 gpm.

Medium volume motor = 17,200 fpm at 21 gpm.
High volume motor = 18,550 fpm at 27 gpm.

Allows the operator to cut close to obstacles on the right side.

Provides easy operation and handling over uneven terrain, laminated tire can’t go
flat.

Allows smoother travel over rough terrain with the optional gauge wheel easing the
fatigue put on the operator.

Provides additional operator protection from flying objects.

Provides additional operator protection from flying objects by allowing the Rotary
Cutter to only be lifted up to 18".