Land Pride SC2672 Manuale Utente

Return line from motor has been pinched
or is collapsed.

Replace lower seal of motor. Check motor
return hose for kinks.

Case drain line is not properly connected.

Connect case drain line to the hydraulic
motor and skid steer reservoir.

Return line from motor has been pinched
or is collapsed.

Replace lower seal of motor and Spindle
Hub output shaft seal. Check motor return
hose for kinks.

Cutting on sandy ground.

Raise cutting height.

Contacting ground frequently.

Raise cutting height.

Return line from motor has been pinched
or is collapsed.

Replace lower seal of motor and Spindle
Hub output shaft seal. Check motor return
hose for kinks.

Insufficient shimming.

Add shimming. See text.

Blade bolts not tightened properly.

Torque blade bolt nuts to 450 ft lbs.

Running loose in the past.

Replace gearbox output shaft and blade
carrier.

Blade carrier hardware not tight enough.

Tighten to specified torque.

Blade hardware running loose.

Replace blades and blade bolts if worn.

Hitting solid objects.

Thoroughly check the cutting area
BEFORE beginning to cut. Be alert during
cutting.

Worn spindle hub bearings.

Replace Spindle Hub bearings and/or
shaft.

Shaft nut loose.

Tighten Spindle Hub shaft nut to 450 ft lbs.

Hitting solid objects.

Avoid solid objects/Be alert.

Lowering too fast.

Adjust rate of drop.

Hitting objects when turning.

Reduce speed on turns.

Cutting height not level or blade missing.

Adjust deck height or replace.

Soil abrasive.

Raise cutting height.

Cutting too low.

Raise cutting height.

Locked blades.

Inspect and unlock blades.

Blades have unequal weight.

Replace blades as a PAIR.

Blade carrier bent.

Replace / straighten blade carrier.