Land Pride rcfm3696 Manuale Utente
30
Section 2: Assembly of Optional Equipment
RCF3696, RCFM3696, RCF3610, & RCFM3610 Rotary Cutters 326-600M
12/15/15
Check Chains (Accessory)
For 3-Point & Semi-Mount Cutters
(Available through Land Pride parts department.)
Refer to Figure 2-5:
Check chains are used to control the cutting height and
allow the mower to be lowered to the same preset cutting
height effortlessly. Install lower end of check chain (#1) to
the inner hitch ear as shown in Figure 2-5, using the
3/4"-10 x 1 1/2 long bolts (#2), lock washers (#3) and nuts
(#4). Tighten securely. Install chain lugs (#5) on either
side of the tractor top link mount using pin (not supplied).
Cutting height is then set by placing proper chain link in
key slot (#5).
allow the mower to be lowered to the same preset cutting
height effortlessly. Install lower end of check chain (#1) to
the inner hitch ear as shown in Figure 2-5, using the
3/4"-10 x 1 1/2 long bolts (#2), lock washers (#3) and nuts
(#4). Tighten securely. Install chain lugs (#5) on either
side of the tractor top link mount using pin (not supplied).
Cutting height is then set by placing proper chain link in
key slot (#5).
Check Chain Assembly
Figure 2-5
NOTE: For additional safety in transport, raise
cutter as high as possible, and shorten check chains
to prevent inadvertent falling in transport.
cutter as high as possible, and shorten check chains
to prevent inadvertent falling in transport.
16264