Tanaka TBL-4610 Manuale Utente

 
 

 
www.tanakapowerequipment.com                            9                                                 custsvc@tanaka-ism.com

 

 

 
 
 
 
 
 
 
 

 

If element is hard due to excessive dirt buildup, replace it.

 

The air filter must be cleaned from dust and dirt in order to avoid: 

• Carburetor malfunctions. 
• Starting problems. 
• Engine power reduction. 
• Unnecessary wear on the engine parts. 

• Abnormal fuel consumption. 

Remove the air cleaner cover by pushing and pulling back the tab on the top. (Fig. 3-2) 

Clean the cleaner element every day or every 8 hours of operation. More frequent cleaning is recommended under 

very dusty conditions. Wash the element in liquid detergent and water. Squeeze the element to remove the dirt. Press 

the element in a dry rag until it is completely dry. Saturate the element in 2-cycle oil or the equivalent. Squeeze the 

element to distribute the oil completely and to remove any excess oil. Replace the element and install the cover. (Fig. 

Drain all fuel from fuel tank and pull fuel filter line from tank. Pull filter element out of holder assembly and rinse 

element in warm water with detergent. 
Rinse thoroughly until all traces of detergent are eliminated. Squeeze, do not wring, away excess water and allow 

element to air dry.