Tanaka TBL-4610 Manuale Utente

 
 

 
www.tanakapowerequipment.com                            11                                               custsvc@tanaka-ism.com

 

 

 

 

 

• Check the starter, especially cord and return spring. 
• Clean the exterior of the spark plug. 

• Remove it and check the electrode gap. Adjust it to 0.6 mm (.024”), or change the 

spark plug. 

• Clean the cooling fins on the cylinder and check that the air intake at the starter is 

not clogged. 

• Clean the air filter. 

• Rinse the fuel tank with gasoline. 
• Clean the exterior of the carburetor and the space around it. 
• Clean the fan and the space around it.

 

• Clean the exterior of the unit. 
• Check the dust cover for damage or cracks. Change the cover in case of impacts or 

cracks. (Hand held blower only) 

• Check that nuts and screws are sufficiently tightened. 

Maintenance schedule 
Below you will find some general maintenance instructions. For further information 

please contact your service dealer.