Dimension One Spas Bay Collection Manuale Utente

2004 Bay Collection 

Owner’s Manual 

 

 

 
When the Water Feature Button is pushed the pump controlling the fountain 
is activated. A second push will turn the pump off. Each time the Water 
Feature Button is pushed it activates a programmable, automatic shut-off cycle. 
The default time is 1 hour. Your choices are 1, 2, 3, or 4 hours. 
 
See the section on 

changing the automatic shut-off cycle. 
 

 

The automatic shut-off cycles are a safety device that will reduce 
wear and tear on your equipment and reduce energy costs by 
ensuring that your pumps don’t run constantly. 

 
When the Up or Down Button is pushed to change the set temperature, the 
bottom left of the Digital Display Window will read “SET TEMP TO _ _ _° F”.  
After 5 seconds, the display will automatically display the current water 
temperature again. The water temperature may be adjusted from 59° F (≅15° C) 
and 104° F (≅40° C). 
 
 

 

 

 

 

These buttons are also used to make custom selections when you 
are programming the Scrolling Message Center. See the section 
on 

 for more details on 

changing your spa’s default settings. 

26