Dimension One Spas Bay Collection Manuale Utente

2004 Bay Collection 

Owner’s Manual 

 

 

 

 

 
When “SPA CHECK UP” is displayed on the Digital Display Window, we 
recommend that you have your hot tub inspected by your dealer as a 
preventative maintenance measure.  
 
To reset this message, push and hold the Dimension One Spas 
ICON (logo)® Button located at the right hand side of the 
control for 3 seconds. 
 

 

The system can dismiss and reset the maintenance messages by pushing and holding the 
Dimension One Spas ICON (logo)®, on the right end of the control, for 3 seconds. If you 
press the Dimension One Spas ICON (logo)® for 5 seconds when there is no 
maintenance message, it will put the spa in the “Standby” mode. 

 

 

 
DO NOT ENTER THE WATER when “OVERHEAT” is displayed on 
the control system Digital Display Window because the hot tub is in a high 
temperature condition. If such a condition exists, check the water 
temperature with a certified thermometer and if it is above 104° F (≅40° C), 
remove the hot tub cover and allow the water to cool. If the problem recurs, 
turn off all power to the hot tub and contact your local Authorized 
Dimension One Spas Dealer, or authorized service center

. 

 

 
The overheat condition could be caused by excessive filtration. 
See the 

 section for more information. 

 

 

 

 
DO NOT ENTER THE WATER if you see “3 flashing LEDs” on the 
Top Side Control and/or the message, “CHECK WATER LEVEL -CLEAN 
FILTER-IF PROBLEM CONTINUES, TURN OFF POWER AND 
RESTART THE SYSTEM-IF PROBLEM CONTINUES, CALL FOR 
SERVICE” in the Digital Display Window. Follow the instructions as stated.  
 
Check the water temperature and if it is above 104° F (≅40° C) and DO 
NOT ENTER THE WATER. 

 

 
DO NOT ENTER THE WATER if you see a temperature reading of 32° 
F (≅0° C) or 136° F (≅57.8° C) without first checking the actual water 
temperature with a separate thermometer. The system has detected a 
Temperature Probe Failure and the water may be too hot, or too cold, to 
safely use.  
 
Contact your local Authorized Dimension One Spas Dealer, or authorized 
service center. 
 

30