Roland AT20s Manuale Utente
18
Before You Start Playing
Restoring All the Factory
Default Settings
The settings stored in the AT-20S can be returned to their
factory settings. This function is called “Factory Reset.”
1.
Make sure there is no floppy disk in the disk
drive before carrying out the procedure.
2.
Turning off the power.
3.
While holding down the [One Touch Program]
button, press the [Power On] switch to turn the
power on.
fig.01-15
The following display appears.
fig.01-16
When factory reset is completed, the basic screen reap-
pears.
pears.
* Loading factory default settings will erase any Registrations
currently in the memory of the AT-20S. To save the registra-
* Even if you perform the Factory Reset operation, the Rhythm
[Disk] button will not return to the factory settings.
If you wish to return the Rhythm [Disk] button to the factory
Displaying Basic Screens
The instrument’s display provides a large variety of infor-
mation. The AT-20S has two types of basic display screen: the
Rhythm display, and the Composer display. You can
alternate from one to the other by pressing the [Display/Exit]
button.
fig.01-17
■
Rhythm Screen
fig.01-18
■
Composer Screen
When internal music data is selected:
fig.01-19
When you have selected a performance song on a floppy
disk:
disk:
fig.01-20
Power On
Program
One Touch
Beat
Measure
Rhythm / Song Name
Chord
Tempo
Display / Exit
Part
Menu
Value
Utility
Rhythm
Tempo
Chord
Song Name
Measure Number
Tempo
Chord
Song Name
Song No.
Tempo
Chord
AT-20S.e.book 18 ページ ２００３年１１月１０日 月曜日 午後２時３７分