Roland VR-700 Manuale Utente

 

Connecting MIDI Equipment

 

fig.ConnectMIDIkey.eps

 

Turn the Function mode setting “Sub Keyboard Function” OFF.

* If “Sub Keyboard Function” is OFF, you can play any desired part of 

the organ/ensemble sound generator by setting your MIDI 

Set the Function mode “Sub Keyboard Function” to Upper (to play 

the upper part) or Lower (to play the lower part).

* If “Sub Keyboard Function” (p. 57) is set to Upper (or Lower), MIDI 

messages received at the MIDI IN connector will automatically be 

converted to the MIDI channel specified for “Upper Organ MIDI 

Channel” (or “Lower Organ MIDI Channel”). The routing will be the 

 

fig.ConnectMIDISeq.eps

 

You can use a MIDI cable (sold separately) to connect a MIDI 

sequencer to the VR-700; the sequencer can record your 

performance on the VR-700, and the VR-700 can sound the playback 

from the sequencer.

If your external MIDI sequencer’s MIDI Thru function is enabled, 

change the following Function mode parameters as follows.

• Set “Local Control” to OFF (it will be ON when the power is turned 

on)

• Set “MIDI Thru Switch” to OFF (factory setting is ON)

* The “Local Control” setting is not remembered by the VR-700. It will 

be ON when you turn on the power.

* If “Sub Keyboard Function” (p. 57) is set to Upper (or Lower), MIDI 

messages received at the MIDI IN connector will automatically be 

converted to the MIDI channel specified by “Upper Organ MIDI 

Channel” (or “Lower Organ MIDI Channel”). The routing will be the 

 

fig.MIDIroute03.eps

 

Connecting an External MIDI 
Keyboard

 

Playing a Desired Part (Factory Settings)

Playing the Upper Part or Lower Part

 

Connecting an External MIDI 
Sequencer

 

Local Control Setting

VR-700_e.book 66 ページ ２００９年１１月１８日　水曜日　午前９時２４分