Roland LX-10 Manuale Utente

Pagina di 120
 
23
 
Before You Play
 
You can use headphones to enjoy the LX-10 without disturbing 
those around you, such as at night. Since the LX-10 has two 
headphone jacks, two people can also use headphones 
simultaneously. 
If you’re using only one set of headphones, you may connect 
them to either of the two headphone jacks.
 
fig.Headphones.eps
 
1.
 
Plug the headphones into the Phones jack 
located at the left of front side bottom of the 
LX-10’s bottom panel.
 
If headphones are connected, no sound will be output 
from the LX-10’s speakers.
 
2.
 
adjust the headphone volume.
 
Cautions when Using Headphones
 
To prevent damage to the cord’s internal conductors, avoid 
rough handling. When using headphones, mainly try to 
handle either the plug or the headset.
Your headphones may be damaged if the volume of a device 
is already turned up when you plug them in. Minimize the 
volume before you plug in the headphones.
Excessive input will not only damage your hearing, but may 
also strain the headphones. Please enjoy music at an 
appropriate volume.
Use headphones that have a stereo 1/4” phone plug.
Whenever you are not using the headphones, you can hang 
them on the headphone hook of the LX-10.
 
Attaching the Headphone Hook
 
1.
 
Press and twist the headphone hook 
included with the LX-10 into the hole in the 
bottom left of the LX-10 (refer to the figure 
above).
 
2.
 
Turn the headphone hook wing nut to secure 
the headphone hook.
 
Do not hang anything other than headphones on the 
headphone hook. Doing so may damage the 
instrument or the hook.
If headphones are connected, a headphone symbol is 
shown in the lower left of the screen.
 
fig.PhonesMark.eps
 
Listening through 
Headphones
Headphones
 
Using the Headphone Hook
Headphone Hook
Wing Nut
NOTE
LX-10_e.book 23 ページ 2008年9月22日 月曜日 午前10時51分