Roland LX-10 Manuale Utente

 

Various Settings

 

When you press the pedal during Dual play or Split play, the 

pedal effect is normally applied to both tones, but you can also 

select the tone to which the effect is to be applied. This setting 

can be changed for each pedal.

When you turn on the power, the left pedal functions as the soft 
pedal, and the center pedal functions as the sostenuto pedal (p. 
22). You can change the function of the pedal to a variety of other 
operations.

Here you can make various MIDI-related settings for the LX-10.

When you have a MIDI sequencer connected, set this parameter 

to Local Off. 

Since the Thru function of your sequencer will normally be 

turned on, notes played on the keyboard or played back by the 

recorder will be transmitted to the sound generator by the two 

routes (1) and (2) shown in the illustration, causing notes to be 

sounded in duplicate or to be cut off unnaturally. To prevent this, 

the setting called “Local Off” is used to disconnect the route in 

(1).

 

fig.LocalCntr.e

 

The keyboard and recorder are connected to the 

internal sound generator.

 

fig.LocalOn.e

 

The keyboard and recorder are not connected to the 

internal sound generator. No sound will be produced 

by the keyboard when it is played.

 

fig.LocalOff.e

 

All enabled

 

Applied only to the Tone 1 (in dual mode)/

Right-hand Tone (in split mode)

 

Applied only to the Tone 2 (in dual mode)/

Right-hand Tone (in split mode)

 

Sets function to damper pedal.

 

Sets function to soft pedal.

 

Sets function to sostenuto pedal.

 

Allows control of the volume.

 

The pedal will have the same function as the 
[

] button.

 

Effects can be switched on/off by pressing 
the pedal instead of pressing the [Effects] 
button. When effect type is rotary, you can 
control the slow/fast of spinning.

 

Pitch rises by pressing the pedal.

 

Pitch lowers by pressing the pedal.

 

Vibrato is added by pressing the pedal.

 

Pressing the pedal will layer on Tone 2, used 
for Dual play.

 

*

The Layer function can be applied only when 

 

Pressing the pedal will layer on a sound one 
octave higher.

 

*

The Octave function cannot be applied while 

MIDI

MIDI

MIDI

MIDI

IN

IN

OUT

OUT

Sequencer

Memory

Sound

Generator

Each note played is sounded twice

Local On

Sound is emitted

Sound Generator

Local Off

No sound produced

Sound Generator

LX-10_e.book 85 ページ ２００８年９月２２日　月曜日　午前１０時５１分