Roland LX-10 Manuale Utente

 

Various Settings

 

Here’s how to specify the channel on which messages for 

controlling video will be transmitted.

 

921

 

The screen for setting the V-LINK transmission channel 

appears.

 

With the factory settings, this is set to “16.”

Normally, you don’t need to install a driver in order to connect 

the LX-10 to your computer. However, if some problem occurs, or 

if the performance is poor, using the Roland original driver may 

solve the problem.

Specify the USB driver you want to use, and then install the 

driver.

If you change this setting, turn on the power once again.

For details on downloading and installing the Roland 

original driver, refer to the Roland website.

Roland website:

http://www.roland.com/

For details on connecting your computer via the USB 

This setting is remembered even when the power is 

turned off.

In some cases, when USB memory is connected to the external 

memory connector, it may take longer for data to be loaded, or 

data may fail to be loaded successfully. If this occurs, you may be 

able to solve the problem by changing the external memory 

setting.

If you change this setting, turn on the power once again.

This setting is remembered even when the power is 

turned off.

 

Choose this if you want to use the standard 
USB driver that was included with your 
computer. 
Normally, you should use this mode.

 

Choose this if you want to use a USB driver 
downloaded from the Roland website.

LX-10_e.book 87 ページ ２００８年９月２２日　月曜日　午前１０時５１分