Roland AT15 Manuale Utente
76
Record and Playback Your Performance
Layering a New Recording onto SMF
Music Files
You can load commercially available SMF music files into the AT-15, and
record your own performance on top of it. During recording, the data
you’ve loaded will be played back, while everything you play on the upper
and lower manuals will be recorded.
record your own performance on top of it. During recording, the data
you’ve loaded will be played back, while everything you play on the upper
and lower manuals will be recorded.
1.
Insert a floppy disk containing commercially available SMF
music files into the floppy disk drive.
2.
Press the Select [-] [+] buttons to select the music file that
you wish to load into the AT-15.
3.
Press the [Load] button.
The selected music file will be loaded.
While performance data is being loaded, the following screen will appear.
4.
Press the [Rec] button to enter record-ready mode.
The [Rec] button indicator will light, and the [Play/Stop] button indicator
will blink.
will blink.
5.
Make the panel settings that you wish to record.
6.
Press the [Play/Stop] button to begin recording.
When you press the [Play/Stop] button, the metronome will play two
measures (bars) of count-in before recording begins.
measures (bars) of count-in before recording begins.
As you record, the music file that was loaded into the AT-15 will play back.
Your own performance (on the upper and lower manuals) will be recorded
on top of the music files that you’ve loaded.
on top of the music files that you’ve loaded.
When the music files include performance data on Channel 1 (when the Solo
voice is on), Channel 3, or Channel 4, that performance data is deleted, and
the performance on the upper manual or lower manual is recorded.
voice is on), Channel 3, or Channel 4, that performance data is deleted, and
the performance on the upper manual or lower manual is recorded.
7.
Press the [Play/Stop] button to stop recording.
Keyboard
AT-15 Track
SMF
Lower Keyboard
Lower
3
Upper Keyboard
Upper
4
Solo
1 (when the Solo voice is on)
NOTE
Commercially sold music
files can also be loaded into
the AT-15, but for reasons
of copyright protection,
cannot be saved in SMF
format.
files can also be loaded into
the AT-15, but for reasons
of copyright protection,
cannot be saved in SMF
format.
You can re-record the pedal
keyboard performance. For
details refer to “Re-
recording the Pedalboard
Performance” (p. 82).
keyboard performance. For
details refer to “Re-
recording the Pedalboard
Performance” (p. 82).
NOTE
The performances of
Channel 2 in SMF music
files are deleted when
pedal performances are
recorded over again.
Channel 2 in SMF music
files are deleted when
pedal performances are
recorded over again.
AT-15_e.book 76 ページ ２００５年１月２１日 金曜日 午後８時１４分