Roland AT15 Manuale Utente
77
Record and Playback Your Performance
Re-recording a Performance Saved on
Floppy Disk
A song saved on floppy disk can be loaded into the AT-15, and you can then
re-record the performances of the upper keyboard and lower keyboard.
re-record the performances of the upper keyboard and lower keyboard.
1.
Into the disk drive, insert the floppy disk that contains the
performance data.
performance data.
2.
Press the Select [-] [+] buttons to select the performance data
that you wish to load into the AT-15.
that you wish to load into the AT-15.
3.
Press the [Load] button.
The selected performance data will be loaded.
4.
Press the [Rec] button to enter record-ready mode.
The [Rec] button indicator will light, and the [Play/Stop] button indicator
will blink.
will blink.
5.
Make the panel settings that you wish to record.
6.
Press the [Play/Stop] button to begin recording.
When you press the [Play/Stop] button, the metronome will play two
measures (bars) of count-in before recording begins.
As you record, the music file that was loaded into the AT-15 will play back.
Your own performance (on the upper and lower manuals) will be recorded
on top of the music files that you’ve loaded.
If the loaded music files contains upper keyboard and/or lower keyboard
performances, that performance data will be erased and replaced by your
new performance.
measures (bars) of count-in before recording begins.
As you record, the music file that was loaded into the AT-15 will play back.
Your own performance (on the upper and lower manuals) will be recorded
on top of the music files that you’ve loaded.
If the loaded music files contains upper keyboard and/or lower keyboard
performances, that performance data will be erased and replaced by your
new performance.
7.
Press the [Play/Stop] button to stop recording.
Using Song with a Different Tempo
Than That of the Performance Song
1.
Into the disk drive, insert the floppy disk that contains the
performance data.
performance data.
2.
Press the Select [-] [+] buttons to select the performance data
that you wish to load into the AT-15.
that you wish to load into the AT-15.
3.
Press the [Load] button.
The selected performance data will be loaded.
4.
Determine the tempo with the Tempo [
] and [
]
buttons.
5.
Hold down the [Reset] button and press the [Rec] button.
You can re-record the pedal
keyboard performance.
For details refer to “Re-
recording the Pedalboard
Performance” (p. 82)
keyboard performance.
For details refer to “Re-
recording the Pedalboard
Performance” (p. 82)
AT-15_e.book 77 ページ ２００５年１月２１日 金曜日 午後８時１４分