Euphonix 840-07591-04 Manuale Utente

 

Euphonix System 5 Installation Guide

System 5 Components

50

Figure 3-19 AM713 Rear Panel

Input Voltage Selector: This red switch allows the unit to operate in either 100/110/115 
VAC or 220/230/240 VAC environments. A fuse must also be changed for 220/230/240 
VAC operation. Units are shipped set and fused for 100/110/115 VAC. 

Power Connector (IEC) and Fuse Tray: The IEC power connector accepts standard IEC 
power cords. The fuse tray contains both the active fuse and a spare fuse for 220/230/240 
VAC operation. 

Analog Inputs (female XLR): 24 balanced, analog inputs on XLR connectors. Input sen-
sitivity is set from the front panel.

Auxiliary Analog Inputs (female XLR): Two balanced analog inputs on XLR connectors. In-
put sensitivity is set from the front panel.

AES/EBU Digital Input (female XLR): Stereo AES/EBU digital input on one XLR con-
nector. Functions in parallel with the auxiliary S/PDIF input and the two inputs should not 
be used simultaneously.

S/PDIF Digital Input (RCA): Stereo S/PDIF digital input on one RCA connector. Func-
tions in parallel with the auxiliary AES/EBU input and the two inputs should not be used 
simultaneously.

AES Sync In (female XLR): Master clock input for the converter when using AES as Sam-
ple Rate Source.

AES Sync Thru (male XLR): Outputs the same signal connected to AES Sync In.

Word In (BNC): Master clock input for the converter when using Word Clock as Sample 
Rate Source.

Word Out (BNC): Outputs a Word clock signal synchronized to the Sample Rate Source. 
In the presence of an external Word clock input, this connector provides a regenerated 
version of that input signal. Without an external sample rate source, this connector outputs 
the internally generated clock signal.