Sony SRP-V110 Manuale Utente
10
Name and function of each part
AUX OUTPUT
MONO INPUT
INSERT
10
LINE
MIC
INSERT
8
LINE
MIC
7
8
R
L(MONO)
4
3
6
5
8
7
R
L
R
L(MONO)
R
L(MONO)
R
L(MONO)
R
L
R
L(MONO)
R
L(MONO)
L
R
+48V
R
L
R
L
L
R
OUT
IN
2TR
MASTER
STEREO INPUT
ST1
ST2
ST5
ST6
ST3
ST4
ST7
ST8
MONITOR
OUT
GRP/
DIRECT
OUT
TAPE
IN
INSERT
OUTPUT
ON
OFF
8
6
9
!¡
!™
!£
!º
4
7
5
0
5 STEREO INPUT connectors
Phone jacks (ST1 – ST4)
(Tip: hot, Ring: cold, Sleeve: ground)
(Balanced, reference level: +4/ –10 dBu)
Phone jacks (ST6, ST8)
(Unbalanced, reference level: –10 dBu)
Phono jacks (ST5, ST7)
(Unbalanced, reference level: –10 dBu)
These are input connectors for the STEREO INPUT
channels. Line level output equipment with a
reference level of between +4 dBu and –10 dBu can be
connected for ST1 - ST4, and line level output
equipment with a reference level of –10 dBu can be
connected for ST5 - ST8 in stereo. Signals are internally
distributed to the R side when only the L (MONO)
connector is connected for ST1 - ST4, ST6 and ST8.
(Tip: hot, Ring: cold, Sleeve: ground)
(Balanced, reference level: +4/ –10 dBu)
Phone jacks (ST6, ST8)
(Unbalanced, reference level: –10 dBu)
Phono jacks (ST5, ST7)
(Unbalanced, reference level: –10 dBu)
These are input connectors for the STEREO INPUT
channels. Line level output equipment with a
reference level of between +4 dBu and –10 dBu can be
connected for ST1 - ST4, and line level output
equipment with a reference level of –10 dBu can be
connected for ST5 - ST8 in stereo. Signals are internally
distributed to the R side when only the L (MONO)
connector is connected for ST1 - ST4, ST6 and ST8.
6 2TR IN connectors
Phono jacks (Unbalanced, reference level: –10 dBu)
These are connectors to input signals, such as those
from DAT or MD recorders. The level is controlled by
the 2TR IN level control on the MASTER section.
These are connectors to input signals, such as those
from DAT or MD recorders. The level is controlled by
the 2TR IN level control on the MASTER section.
7 GRP/DIRECT OUT connectors
Phono jacks (Unbalanced, reference level: –10 dBu)
These output each GROUP bus signal. When the
DIRECT button for the MONO INPUT 1 - 8 channels is
turned on, they become direct output connectors that
output post fader signals from each MONO INPUT
channel.
These output each GROUP bus signal. When the
DIRECT button for the MONO INPUT 1 - 8 channels is
turned on, they become direct output connectors that
output post fader signals from each MONO INPUT
channel.
1 MONO INPUT MIC connectors
XLR-3-31 type
(Balanced, reference level: –60 - –10 dBu)
(Pin No.1: ground, No.2: hot, No.3: cold)
These are input connectors for the MONO INPUT
channels. Microphones can be connected.
(Balanced, reference level: –60 - –10 dBu)
(Pin No.1: ground, No.2: hot, No.3: cold)
These are input connectors for the MONO INPUT
channels. Microphones can be connected.
2 MONO INPUT LINE connectors
Phone jacks
(Balanced, reference level: –40 - +10 dBu)
(Tip: hot, Ring: cold, Sleeve: ground)
These are input connectors for the MONO INPUT
channels. Line level output equipment can be
connected.
(Balanced, reference level: –40 - +10 dBu)
(Tip: hot, Ring: cold, Sleeve: ground)
These are input connectors for the MONO INPUT
channels. Line level output equipment can be
connected.
3 MONO INPUT INSERT connectors
Phone jacks
(Unbalanced, reference level: –3 dBu)
(Tip: output, Ring: input, Sleeve: ground)
These are INSERT IN/OUT connectors for the MONO
INPUT channels. External equipment can be inserted
before the installed equalizer. Compressors and gates,
etc. are connected.
(Unbalanced, reference level: –3 dBu)
(Tip: output, Ring: input, Sleeve: ground)
These are INSERT IN/OUT connectors for the MONO
INPUT channels. External equipment can be inserted
before the installed equalizer. Compressors and gates,
etc. are connected.
4 TAPE IN connectors
Phono jacks (Unbalanced, reference level: –10 dBu)
These are TAPE IN connectors for MONO INPUT
channels. They connect the output for each track, such
as from a multi-track recorder, etc., and are used for
monitoring or laying down tracks.
These are TAPE IN connectors for MONO INPUT
channels. They connect the output for each track, such
as from a multi-track recorder, etc., and are used for
monitoring or laying down tracks.
Back panel section