Stanton PRO-30 Manuale Utente

1. Input selector switches:  Selects phono or line inputs of channels 1 and 2
2. Gain control:  Controls the input sensitivity of channels 1 and 2
3. Equalizer:  Individual  controls for low frequency, midrange, and high frequency  

equalization with (+9/-26 dB) 

Any changes made to EQ settings will change the 

overall output level.

4. Channel faders:  Control the output level of channels 1 and 2
5. Crossfader:  Fades the master output between channels 1 and 2
6. Level meter:  Based upon the meter mode selector (7) setting, the level meter displays 

the master output stereo signal level, or the cue levels of channels 1 and 2

7. Meter mode selector: Determines the setting of the level meter (6).  When pressed,  

cue levels of channels 1 and 2 are displayed. When released, stereo master output 
signal is displayed.

8. Power switch: Selects power "ON" or "OFF"
9. Fader Start controls: Activate the Fader Start function when connected to a CD player 

with fader start capabilities (such as the Next! NCD-7000). When fader start is 
engaged, the CD player can be started and paused by the crossfader. This function is

defeated while crossfader is reversed.

10. Master level control: Controls the overall signal output level of the Master output
11. Booth level control: Controls the overall signal output level of the Booth output
12. Cue level control: Controls the overall headphone output level. 
13. Cue select: 3 position selector switch dtermines what is heard in the headphones, 

channel 1, 2, or master output

14. Headphone output:  Connection for 1/4 inch headphone. 

Recommended 

headphone impedance is 32-200 ohms for maximum volume 

15. Mic EQ:  Individual  controls for low and high frequencies equalization with (+/-12 dB) 

Any changes made to EQ settings will change the overall microphone  output

level.

16. Mic volume control: Controls the overall mirophone output level
17. Crossfader Reverse: Reverses the direction of the crossfader. The fader start function 

is defeated while crossfader is reversed.

18. Microphone input: 1/4” connector
19. Ground connector: Connects to the turntable ground connector to eliminate electrical 

hum. Ground connectors are usually supplied with turntables

20. Phono/CD inputs: Switchable line / phono signal inputs for channels 1 and 2
21. Line inputs: Line signal inputs for channels 1 and 2
22. Phono/CD selector switches: Switches CD/Phono inputs for channels 1 and 2 between 

line and phono 

23. Fader Start output: Connects to the fader start inputs of CD players with fader start

function such as the Next! NCD-7000

24. Booth output: Auxiliary output, usually for DJ booth monitoring. Level is controlled by

booth level control (11)

25. Master output: Level is controlled by master level control (10)
26. REC output: Record out connects to tape recorder, mini disk recorder, etc. to 

record performance

27. Voltage selector: Selects between 115V (US) / 230V (EU)
28. Power cord connector: Input connection for the supplied removable power cord.